It's a tight fit, but with a little careful (okay, not so careful) trimming of the brushguard mounting plates with a reciprocating saw, I managed to get a set of Mopar tow hooks installed in conjunction with the brushguard. You can see how the uprights of the brushguard contact the inside diameter of the tow hooks. Also note that the foremost brushguard mounting bolts stick out enough to cause problems with slipping a recovery strap over each hook. I'll remedy this by taking a hacksaw to the exposed bolts.
All pics are of the driver's side tow hook and/or brushguard mounting plate.
 |
 |
 |
 |
 |